˵Ã÷Êé˵Ã÷ÊéRKP-622/623/823KP-622/623/823OPERATOR`S MANUAL3 Series GPS Chart Plotter
82 Navigation screen Pressing MENU key displays the following menu.Hides the markings of initial course.Change the items showed in the data field . Sa
IPower on :Pressing and holding the Power key till it beeps turns the power on, the screen displays pictures.Power off Pressing and holding the Power
Delete the waypoint with the main menu Press the MENU key twice to enter the main menu, move the cursor to the "Point" , then move the curso
2.2.4. Single point navigation and cancel navigationSingle point navigation Pressing the NAV key at any screen appears the navigation menu. Move the c
122 ) Press the MODE key to enter the plotter screen, press the MENU key andmove the cursor to the " " column, then press the ENT key, the
13route/reverse route navigation Press the MODE key to enter the screen, then press MENU key and move the cursor to the "Start Navigation&quo
After the beginning of track record, even if it's under the pause state, move the cursor to the "Stop", click ENT key to turn off the r
Selecting "Type" means to adopt a different way of drawing to displaythe tracks on the chart screen, the line the following four kindsof l
16Track display on/off Double-click the MENU key to enter the main menu, move the cursor to the "Track" column, and then press the right Arr
17The other way to enter track back navigation is as following: Click the NAV key at any screen, move the cursor to " " column and press ENT
183.THE MAIN MENU FUNTION3.THE MAIN MENU FUNTIONPressing the MENU key twice at any of the main screens can enter the main menu, move the cursor to a c
19BarriersBarrier there is barrierNew BarrBarrier besideshow barriers on the chartSet Up MapShow Barrier NamebarrierbarrierNew WPTInsert to BarriView
20AlarmNext WPTOffset Anchor Drag Impact(Collision)PDOP (accuracy) Enter the "Alarm" column to review and set the alarm as following: poin
21SetupMarine or SimulatorInside, SD or AutoSpeed Filteruser'sRotate MapRemain SpaceOil Used Ratedestination Enter the "Setup" column t
224.THE AIS FUNTION4.THE AIS FUNTION4.1 Start AIS functionEnter the "Main Menu", select the "In/Out" column, at the " "
234.5 Chart ScreenUsers can check all AIS vessels being received in real-time on the chart screen, as wellas the specific position and track of the ow
244.6 View AIS vessels' information on chart screenThere're two ways to view AIS vessels' information: one is to move the cursor to se
The relevant data (including the time, place, the relevant ship s information,etc.) will also be saved by the display terminals, it can be the basis o
Navigation TermsBearing(BRG) The compass direction from your current location to a destination.Start BRG The desired course between the active from an
275.Main Performance and Specifications5.Main Performance and Specifications5.1 Performance and characteristics5.1.1 The GPS function1) Satellite rece
1P roduct Introduction
285.1.4. Equipment Parameters1) The shell: ABS all-sealed and waterproof design, metal stents.2) Size:KP-823 262 172 65 mmKP-622/623 205 125 55 mm3) W
295.1.6 Installation: (see Figure 45)Figure 45-a Desktop installationFigure 45-b installationPanelFigure 45-c Ceiling installation
34568712PIN 7 RS 232 TXD PIN 6 Power +PIN 1 Power PIN 8 RS 232 RXD PIN 5 RTCM RXD or otherPIN 3 USB+ PIN 4 USB PIN 2 Sound output81WPower10 38V DCR
Foreword 41. Keypad instruction 52. Basic Operation 62.1 Display 6Plotter screen 7Navigation screen 8Route screen 8Positioning screen 82.2 Operati
Alarm 20Tide 20Unit 20 Setup 21In/Out 214. AIS function of 3 Series 22Start AIS function 22 5. Main performance and specification 27Performance and
FOREWORDFOREWORDThe ONWA 3 seriesof ONWA GPS navigation aid are specially designed for the vessel traffic management, ONWA is a professional brand o
Figure1-11. Keypad instruction 1. Keypad instruction 5Keypad instruction( Figure 1-1) MENU: Pressing it displays the menu of the current page, pressin
2. BASIC OPERATION2. BASIC OPERATION2.1 Main Screens The five main screens are as following: Plotter screen, Navigation screen(see Figure 2), R
(1) Plotter screen : Pressing MENU key displays the following menu, see Figure 4), press [ENT] to enter sub-menu(see Figure 5).Me
Kommentare zu diesen Handbüchern