˵Ã÷Êé˵Ã÷ÊéRKS-200A/BKS-200A/BOPERATOR`S MANUALAIS Class B Transponder KS-200AAIS Receiver KS-200B
6POWERTXRXKS-200AClass B AIS TransponderRGPS Antenna VHF AntennaKS-200A SYSTEM CONFIGURATIONDC 10V 35V
KS-200B SYSTEM CONFIGURATION7VHF AntennaPOWERRXKS-200B AIS ReceiverRDC 10V 35V
Turning Power ONPress [ON/OFF] to ON direction to turn on the power.Turning Power OFFPress [ON/FF] to OFF direction to turn off the power.Notice : If
Turning Power ONPress [ON/OFF] to ON direction to turn on the power.Turning Power OFFPress [ON/FF] to OFF direction to turn off the power.Notice : If
1.Scope of DeliveryDescriptionPart Number Quantity Remark Main unit KS-200A/B Power CableData CableCDOperator's ManualKS2-P
Mast(Pole)INSTALLTION WITH CLAMPSAntennaClampsAntenna CableConnector4. Installation of GPS Antenna 11 The GPS antenna is mounted in an elevated positi
125. Installation of VHF AntennaFor the VHF antenna there is a VHF female bulkhead connector used, that mounts to the back of the case.The VHF antenna
13543219876PIN2 AIS OUT (OrangePIN3 AIS IN (GreenPIN5 GND (BlackDB9 (Male)1.5M6. Connect to other navigational equipmentYou can use the delive
7. Connect to PCYou could use delivered cable (KS2-data2) to connect AIS data to PC as following diagram:8. DATA SERIAL PORT The default baud rate of
15MAINTENANCE and TROUBLESHOOTING1.Maintenance Unauthorized opening of the KS200A/B system will invalidate the warranty. Avoid using chemical solvents
16S/NO.200A1001Power SwitchCONNECTION DIAGRAMVHF antennaGPS AntennaPower CableData cableKS200A Connection DiagramS/NO.200A1001Power SwitchVHF antennaP
DIMENSION14.650126.6155.854.41720717155.817
SAFETY INSTRUCTIONSWARNING Do not open the equipment. Only qualified personnel should workinside the equipment. Do not disassemble or modify theequipm
Table of ContentsSYSTEM CONFIGURATION 6INSTALLATION 101. Scope of Delivery 102. Power Connection 103. Antenna Installation 104. Installation of GPS A
1How AIS Works1. What is AISAIS stands for Automatic Identification System. AIS increases navigational safety and collision avoidance by transmitting
22.1 Class AClass A units are a mandatory fit under the safety of life at sea (SOLAS) convention to vessels above 300 gross tons or which carry more t
3The following table shows the mandatory repetition rate of class A transmissions linked to the ship`s movement: anchored vessels 3 minutes
Physical: -Dimension : 207mm (length) x 155.8mm (Width) x 50mm (Height) -Weight : 0.8kgPower: -Input: 10 ~ 35VDC -Power consump
KS200B:Connectors -VHF Antenna connector PL259 female -RS232 data connector Female 9 Way D-typeVHF Receiver -Receiver x 2 (one time
Kommentare zu diesen Handbüchern